1977 Chrysler Sedan vs. 2006 Mazda 3

To start off, 2006 Mazda 3 is newer by 29 year(s). Which means there will be less support and parts availability for 1977 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1977 Chrysler Sedan would be higher. At 4,342 cc (6 cylinders), 1977 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1977 Chrysler Sedan (201 HP @ 4800 RPM) has 93 more horse power than 2006 Mazda 3. (108 HP @ 4000 RPM). In normal driving conditions, 1977 Chrysler Sedan should accelerate faster than 2006 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 1977 Chrysler Sedan weights approximately 270 kg more than 2006 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1977 Chrysler Sedan is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Chrysler Sedan. However, in wet, icy, snow, or gravel driving conditions, 2006 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Chrysler Sedan (355 Nm @ 2000 RPM) has 115 more torque (in Nm) than 2006 Mazda 3. (240 Nm @ 1750 RPM). This means 1977 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 2006 Mazda 3. 1977 Chrysler Sedan has automatic transmission and 2006 Mazda 3 has manual transmission. 2006 Mazda 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1977 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1977 Chrysler Sedan 2006 Mazda 3
Make Chrysler Mazda
Model Sedan 3
Year Released 1977 2006
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 4342 cc 1558 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 201 HP 108 HP
Engine RPM 4800 RPM 4000 RPM
Torque 355 Nm 240 Nm
Torque RPM 2000 RPM 1750 RPM
Fuel Type Gasoline Diesel
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Doors 4 doors 5 doors
Vehicle Weight 1530 kg 1260 kg
Vehicle Length 5000 mm 4430 mm
Vehicle Width 1890 mm 1760 mm
Vehicle Height 1420 mm 1470 mm
Wheelbase Size 2930 mm 2650 mm