1977 Daihatsu Taft vs. 1956 Holden FE
To start off, 1977 Daihatsu Taft is newer by 21 year(s). Which means there will be less support and parts availability for 1956 Holden FE. In addition, the cost of maintenance, including insurance, on 1956 Holden FE would be higher. At 2,166 cc (6 cylinders), 1956 Holden FE is equipped with a bigger engine. In terms of performance, 1956 Holden FE (60 HP @ 4000 RPM) has 16 more horse power than 1977 Daihatsu Taft. (44 HP @ 5400 RPM) In normal driving conditions, 1956 Holden FE should accelerate faster than 1977 Daihatsu Taft. With that said, vehicle weight also plays an important factor in acceleration. 1977 Daihatsu Taft weights approximately 40 kg more than 1956 Holden FE.
Because 1977 Daihatsu Taft is four wheel drive (4WD), it will have significant more traction and grip than 1956 Holden FE. In wet, icy, snow, or gravel driving conditions, 1977 Daihatsu Taft will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Holden FE (151 Nm @ 1200 RPM) has 88 more torque (in Nm) than 1977 Daihatsu Taft. (63 Nm @ 4200 RPM). This means 1956 Holden FE will have an easier job in driving up hills or pulling heavy equipment than 1977 Daihatsu Taft.
Compare all specifications:
| 1977 Daihatsu Taft | 1956 Holden FE | |
| Make | Daihatsu | Holden |
| Model | Taft | FE |
| Year Released | 1977 | 1956 |
| Engine Size | 958 cc | 2166 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 44 HP | 60 HP |
| Engine RPM | 5400 RPM | 4000 RPM |
| Torque | 63 Nm | 151 Nm |
| Torque RPM | 4200 RPM | 1200 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | 4WD | Rear |
| Vehicle Weight | 1020 kg | 980 kg |
| Vehicle Length | 3370 mm | 4480 mm |
| Vehicle Width | 1470 mm | 1710 mm |
| Vehicle Height | 1830 mm | 1560 mm |
| Wheelbase Size | 2030 mm | 2670 mm |
