1977 Daihatsu Taft vs. 1960 Holden FC
To start off, 1977 Daihatsu Taft is newer by 17 year(s). Which means there will be less support and parts availability for 1960 Holden FC. In addition, the cost of maintenance, including insurance, on 1960 Holden FC would be higher. At 2,165 cc (6 cylinders), 1960 Holden FC is equipped with a bigger engine. In terms of performance, 1960 Holden FC (62 HP @ 4000 RPM) has 18 more horse power than 1977 Daihatsu Taft. (44 HP @ 5400 RPM) In normal driving conditions, 1960 Holden FC should accelerate faster than 1977 Daihatsu Taft. With that said, vehicle weight also plays an important factor in acceleration. 1977 Daihatsu Taft weights approximately 40 kg more than 1960 Holden FC.
Because 1977 Daihatsu Taft is four wheel drive (4WD), it will have significant more traction and grip than 1960 Holden FC. In wet, icy, snow, or gravel driving conditions, 1977 Daihatsu Taft will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1960 Holden FC (150 Nm @ 1400 RPM) has 87 more torque (in Nm) than 1977 Daihatsu Taft. (63 Nm @ 4200 RPM). This means 1960 Holden FC will have an easier job in driving up hills or pulling heavy equipment than 1977 Daihatsu Taft.
Compare all specifications:
| 1977 Daihatsu Taft | 1960 Holden FC | |
| Make | Daihatsu | Holden |
| Model | Taft | FC |
| Year Released | 1977 | 1960 |
| Engine Size | 958 cc | 2165 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 44 HP | 62 HP |
| Engine RPM | 5400 RPM | 4000 RPM |
| Torque | 63 Nm | 150 Nm |
| Torque RPM | 4200 RPM | 1400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | 4WD | Rear |
| Vehicle Weight | 1020 kg | 980 kg |
| Vehicle Length | 3370 mm | 4480 mm |
| Vehicle Width | 1470 mm | 1710 mm |
| Vehicle Height | 1830 mm | 1560 mm |
| Wheelbase Size | 2030 mm | 2670 mm |
