1977 Dodge Aspen vs. 1962 Vauxhall Victor

To start off, 1977 Dodge Aspen is newer by 15 year(s). Which means there will be less support and parts availability for 1962 Vauxhall Victor. In addition, the cost of maintenance, including insurance, on 1962 Vauxhall Victor would be higher. At 3,687 cc (6 cylinders), 1977 Dodge Aspen is equipped with a bigger engine. In terms of performance, 1977 Dodge Aspen (100 HP @ 3600 RPM) has 51 more horse power than 1962 Vauxhall Victor. (49 HP @ 4600 RPM). In normal driving conditions, 1977 Dodge Aspen should accelerate faster than 1962 Vauxhall Victor. With that said, vehicle weight also plays an important factor in acceleration. 1977 Dodge Aspen weights approximately 525 kg more than 1962 Vauxhall Victor. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Dodge Aspen (231 Nm @ 1600 RPM) has 122 more torque (in Nm) than 1962 Vauxhall Victor. (109 Nm @ 2400 RPM). This means 1977 Dodge Aspen will have an easier job in driving up hills or pulling heavy equipment than 1962 Vauxhall Victor.

Compare all specifications:

1977 Dodge Aspen 1962 Vauxhall Victor
Make Dodge Vauxhall
Model Aspen Victor
Year Released 1977 1962
Engine Position Front Front
Engine Size 3687 cc 1507 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 100 HP 49 HP
Engine RPM 3600 RPM 4600 RPM
Torque 231 Nm 109 Nm
Torque RPM 1600 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1465 kg 940 kg
Vehicle Length 5020 mm 4410 mm
Vehicle Width 1870 mm 1640 mm
Vehicle Height 1360 mm 1420 mm
Wheelbase Size 2760 mm 2550 mm