1977 Dodge Aspen vs. 1973 Fiat 132
To start off, 1977 Dodge Aspen is newer by 4 year(s). Which means there will be less support and parts availability for 1973 Fiat 132. In addition, the cost of maintenance, including insurance, on 1973 Fiat 132 would be higher. At 3,687 cc (6 cylinders), 1977 Dodge Aspen is equipped with a bigger engine. In terms of performance, 1973 Fiat 132 (111 HP @ 5600 RPM) has 11 more horse power than 1977 Dodge Aspen. (100 HP @ 3600 RPM) In normal driving conditions, 1973 Fiat 132 should accelerate faster than 1977 Dodge Aspen. With that said, vehicle weight also plays an important factor in acceleration. 1977 Dodge Aspen weights approximately 370 kg more than 1973 Fiat 132.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Dodge Aspen (231 Nm @ 1600 RPM) has 84 more torque (in Nm) than 1973 Fiat 132. (147 Nm @ 3400 RPM). This means 1977 Dodge Aspen will have an easier job in driving up hills or pulling heavy equipment than 1973 Fiat 132.
Compare all specifications:
| 1977 Dodge Aspen | 1973 Fiat 132 | |
| Make | Dodge | Fiat |
| Model | Aspen | 132 |
| Year Released | 1977 | 1973 |
| Engine Position | Front | Front |
| Engine Size | 3687 cc | 1754 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 100 HP | 111 HP |
| Engine RPM | 3600 RPM | 5600 RPM |
| Torque | 231 Nm | 147 Nm |
| Torque RPM | 1600 RPM | 3400 RPM |
| Engine Bore Size | 82.6 mm | 84 mm |
| Engine Stroke Size | 117.5 mm | 79.2 mm |
| Drive Type | Rear | Rear |
| Vehicle Weight | 1465 kg | 1095 kg |
| Vehicle Length | 5020 mm | 4430 mm |
| Vehicle Width | 1870 mm | 1650 mm |
| Vehicle Height | 1360 mm | 1430 mm |
| Wheelbase Size | 2760 mm | 2560 mm |
