1977 Fiat 131 vs. 1967 ZAZ Jalta

To start off, 1977 Fiat 131 is newer by 10 year(s). Which means there will be less support and parts availability for 1967 ZAZ Jalta. In addition, the cost of maintenance, including insurance, on 1967 ZAZ Jalta would be higher. At 1,297 cc (4 cylinders), 1977 Fiat 131 is equipped with a bigger engine. In terms of performance, 1977 Fiat 131 (64 HP @ 5400 RPM) has 37 more horse power than 1967 ZAZ Jalta. (27 HP @ 4000 RPM). In normal driving conditions, 1977 Fiat 131 should accelerate faster than 1967 ZAZ Jalta. With that said, vehicle weight also plays an important factor in acceleration. 1977 Fiat 131 weights approximately 390 kg more than 1967 ZAZ Jalta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Fiat 131 (102 Nm @ 3000 RPM) has 50 more torque (in Nm) than 1967 ZAZ Jalta. (52 Nm @ 2400 RPM). This means 1977 Fiat 131 will have an easier job in driving up hills or pulling heavy equipment than 1967 ZAZ Jalta.

Compare all specifications:

1977 Fiat 131 1967 ZAZ Jalta
Make Fiat ZAZ
Model 131 Jalta
Year Released 1977 1967
Engine Position Front Rear
Engine Size 1297 cc 887 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 64 HP 27 HP
Engine RPM 5400 RPM 4000 RPM
Torque 102 Nm 52 Nm
Torque RPM 3000 RPM 2400 RPM
Engine Bore Size 76.1 mm 72 mm
Engine Stroke Size 71.5 mm 54.5 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 5 seats 5 seats
Vehicle Weight 1020 kg 630 kg
Vehicle Length 4270 mm 3340 mm
Vehicle Width 1660 mm 1410 mm
Vehicle Height 1370 mm 1410 mm
Wheelbase Size 2500 mm 2030 mm