1977 Fiat 132 vs. 1973 Matra-Simca M530
To start off, 1977 Fiat 132 is newer by 4 year(s). Which means there will be less support and parts availability for 1973 Matra-Simca M530. In addition, the cost of maintenance, including insurance, on 1973 Matra-Simca M530 would be higher. At 2,445 cc (4 cylinders), 1977 Fiat 132 is equipped with a bigger engine. In terms of performance, both vehicles can yield 71 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1977 Fiat 132 weights approximately 295 kg more than 1973 Matra-Simca M530.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Fiat 132 (148 Nm @ 2400 RPM) has 20 more torque (in Nm) than 1973 Matra-Simca M530. (128 Nm @ 2800 RPM). This means 1977 Fiat 132 will have an easier job in driving up hills or pulling heavy equipment than 1973 Matra-Simca M530.
Compare all specifications:
| 1977 Fiat 132 | 1973 Matra-Simca M530 | |
| Make | Fiat | Matra-Simca |
| Model | 132 | M530 |
| Year Released | 1977 | 1973 |
| Engine Size | 2445 cc | 1699 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 71 HP | 71 HP |
| Engine RPM | 4200 RPM | 4800 RPM |
| Torque | 148 Nm | 128 Nm |
| Torque RPM | 2400 RPM | 2800 RPM |
| Fuel Type | Diesel | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1230 kg | 935 kg |
| Vehicle Length | 4400 mm | 4200 mm |
| Vehicle Width | 1650 mm | 1630 mm |
| Vehicle Height | 1440 mm | 1210 mm |
| Wheelbase Size | 2500 mm | 2570 mm |
