1977 Fiat X1-9 vs. 2008 Mazda Etude
To start off, 2008 Mazda Etude is newer by 31 year(s). Which means there will be less support and parts availability for 1977 Fiat X1-9. In addition, the cost of maintenance, including insurance, on 1977 Fiat X1-9 would be higher. At 1,839 cc, 2008 Mazda Etude is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda Etude weights approximately 175 kg more than 1977 Fiat X1-9.
Because 1977 Fiat X1-9 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Fiat X1-9. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda Etude, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda Etude (163 Nm @ 4000 RPM) has 45 more torque (in Nm) than 1977 Fiat X1-9. (118 Nm @ 3200 RPM). This means 2008 Mazda Etude will have an easier job in driving up hills or pulling heavy equipment than 1977 Fiat X1-9.
Compare all specifications:
| 1977 Fiat X1-9 | 2008 Mazda Etude | |
| Make | Fiat | Mazda |
| Model | X1-9 | Etude |
| Year Released | 1977 | 2008 |
| Engine Position | Middle | Front |
| Engine Size | 1498 cc | 1839 cc |
| Horse Power | 85 HP | 0 HP |
| Torque | 118 Nm | 163 Nm |
| Torque RPM | 3200 RPM | 4000 RPM |
| Engine Bore Size | 86.4 mm | 83 mm |
| Engine Stroke Size | 63.9 mm | 85 mm |
| Engine Compression Ratio | 9.2:1 | 9.6:1 |
| Top Speed | 180 km/hour | 194 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 918 kg | 1093 kg |
| Wheelbase Size | 2210 mm | 2620 mm |
| Fuel Tank Capacity | 50 L | 55 L |
