1977 Ford 2000 vs. 1965 Ginetta G10
To start off, 1977 Ford 2000 is newer by 12 year(s). Which means there will be less support and parts availability for 1965 Ginetta G10. In addition, the cost of maintenance, including insurance, on 1965 Ginetta G10 would be higher. At 4,726 cc (8 cylinders), 1965 Ginetta G10 is equipped with a bigger engine. In terms of performance, 1965 Ginetta G10 (290 HP @ 5000 RPM) has 191 more horse power than 1977 Ford 2000. (99 HP @ 5200 RPM) In normal driving conditions, 1965 Ginetta G10 should accelerate faster than 1977 Ford 2000. With that said, vehicle weight also plays an important factor in acceleration. 1977 Ford 2000 weights approximately 317 kg more than 1965 Ginetta G10.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1977 Ford 2000 | 1965 Ginetta G10 | |
| Make | Ford | Ginetta |
| Model | 2000 | G10 |
| Year Released | 1977 | 1965 |
| Engine Position | Front | Middle |
| Engine Size | 1992 cc | 4726 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 99 HP | 290 HP |
| Engine RPM | 5200 RPM | 5000 RPM |
| Engine Bore Size | 90.8 mm | 101.6 mm |
| Engine Stroke Size | 77 mm | 72.9 mm |
| Engine Compression Ratio | 9.2:1 | 10.0:1 |
| Top Speed | 161 km/hour | 225 km/hour |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 2 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1257 kg | 940 kg |
| Vehicle Length | 4640 mm | 3990 mm |
| Vehicle Width | 1800 mm | 1510 mm |
| Vehicle Height | 1390 mm | 1280 mm |
| Wheelbase Size | 2780 mm | 2290 mm |
| Fuel Tank Capacity | 65 L | 72 L |
