1977 Holden Kingswood vs. 1986 Oldsmobile Cutlass
To start off, 1986 Oldsmobile Cutlass is newer by 9 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 1977 Holden Kingswood (213 HP @ 4800 RPM) has 124 more horse power than 1986 Oldsmobile Cutlass. (89 HP @ 4400 RPM). In normal driving conditions, 1977 Holden Kingswood should accelerate faster than 1986 Oldsmobile Cutlass. With that said, vehicle weight also plays an important factor in acceleration. 1977 Holden Kingswood weights approximately 210 kg more than 1986 Oldsmobile Cutlass. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Holden Kingswood is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Holden Kingswood. However, in wet, icy, snow, or gravel driving conditions, 1986 Oldsmobile Cutlass, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (400 Nm @ 3100 RPM) has 221 more torque (in Nm) than 1986 Oldsmobile Cutlass. (179 Nm @ 2800 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 1986 Oldsmobile Cutlass. 1986 Oldsmobile Cutlass has automatic transmission and 1977 Holden Kingswood has manual transmission. 1977 Holden Kingswood will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1986 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Holden Kingswood | 1986 Oldsmobile Cutlass | |
Make | Holden | Oldsmobile |
Model | Kingswood | Cutlass |
Year Released | 1977 | 1986 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 2474 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 213 HP | 89 HP |
Engine RPM | 4800 RPM | 4400 RPM |
Torque | 400 Nm | 179 Nm |
Torque RPM | 3100 RPM | 2800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1380 kg | 1170 kg |
Vehicle Length | 4850 mm | 4550 mm |
Vehicle Width | 1900 mm | 1710 mm |
Vehicle Height | 1410 mm | 1330 mm |
Wheelbase Size | 2830 mm | 2640 mm |