1977 Holden Kingswood vs. 2000 Alfa Romeo 166
To start off, 2000 Alfa Romeo 166 is newer by 23 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 2000 Alfa Romeo 166 (226 HP @ 6200 RPM) has 13 more horse power than 1977 Holden Kingswood. (213 HP @ 4800 RPM) In normal driving conditions, 2000 Alfa Romeo 166 should accelerate faster than 1977 Holden Kingswood. With that said, vehicle weight also plays an important factor in acceleration. 2000 Alfa Romeo 166 weights approximately 170 kg more than 1977 Holden Kingswood. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Holden Kingswood is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Holden Kingswood. However, in wet, icy, snow, or gravel driving conditions, 2000 Alfa Romeo 166, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (400 Nm @ 3100 RPM) has 124 more torque (in Nm) than 2000 Alfa Romeo 166. (276 Nm @ 5000 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 2000 Alfa Romeo 166. 2000 Alfa Romeo 166 has automatic transmission and 1977 Holden Kingswood has manual transmission. 1977 Holden Kingswood will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Alfa Romeo 166 will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Holden Kingswood | 2000 Alfa Romeo 166 | |
Make | Holden | Alfa Romeo |
Model | Kingswood | 166 |
Year Released | 1977 | 2000 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 2959 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 213 HP | 226 HP |
Engine RPM | 4800 RPM | 6200 RPM |
Torque | 400 Nm | 276 Nm |
Torque RPM | 3100 RPM | 5000 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1380 kg | 1550 kg |
Vehicle Length | 4850 mm | 4730 mm |
Vehicle Width | 1900 mm | 1820 mm |
Vehicle Height | 1410 mm | 1420 mm |
Wheelbase Size | 2830 mm | 2600 mm |