1977 Holden Kingswood vs. 2002 Lotus Exige
To start off, 2002 Lotus Exige is newer by 25 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 3,298 cc (6 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 2002 Lotus Exige (177 HP @ 7800 RPM) has 68 more horse power than 1977 Holden Kingswood. (109 HP @ 4000 RPM) In normal driving conditions, 2002 Lotus Exige should accelerate faster than 1977 Holden Kingswood. With that said, vehicle weight also plays an important factor in acceleration. 1977 Holden Kingswood weights approximately 560 kg more than 2002 Lotus Exige.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (258 Nm @ 1600 RPM) has 77 more torque (in Nm) than 2002 Lotus Exige. (181 Nm @ 5000 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 2002 Lotus Exige.
Compare all specifications:
1977 Holden Kingswood | 2002 Lotus Exige | |
Make | Holden | Lotus |
Model | Kingswood | Exige |
Year Released | 1977 | 2002 |
Engine Position | Front | Middle |
Engine Size | 3298 cc | 1796 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 109 HP | 177 HP |
Engine RPM | 4000 RPM | 7800 RPM |
Torque | 258 Nm | 181 Nm |
Torque RPM | 1600 RPM | 5000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Vehicle Weight | 1340 kg | 780 kg |
Vehicle Length | 4850 mm | 3800 mm |
Vehicle Width | 1900 mm | 1730 mm |
Vehicle Height | 1410 mm | 1190 mm |
Wheelbase Size | 2830 mm | 2310 mm |