1977 Holden Kingswood vs. 2003 Peugeot 407
To start off, 2003 Peugeot 407 is newer by 26 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 1977 Holden Kingswood (213 HP @ 4800 RPM) has 58 more horse power than 2003 Peugeot 407. (155 HP @ 5650 RPM). In normal driving conditions, 1977 Holden Kingswood should accelerate faster than 2003 Peugeot 407. With that said, vehicle weight also plays an important factor in acceleration. 2003 Peugeot 407 weights approximately 191 kg more than 1977 Holden Kingswood.
Because 1977 Holden Kingswood is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Holden Kingswood. However, in wet, icy, snow, or gravel driving conditions, 2003 Peugeot 407, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (400 Nm @ 3100 RPM) has 183 more torque (in Nm) than 2003 Peugeot 407. (217 Nm @ 3900 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 2003 Peugeot 407. 2003 Peugeot 407 has automatic transmission and 1977 Holden Kingswood has manual transmission. 1977 Holden Kingswood will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Peugeot 407 will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Holden Kingswood | 2003 Peugeot 407 | |
Make | Holden | Peugeot |
Model | Kingswood | 407 |
Year Released | 1977 | 2003 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 2230 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 213 HP | 155 HP |
Engine RPM | 4800 RPM | 5650 RPM |
Torque | 400 Nm | 217 Nm |
Torque RPM | 3100 RPM | 3900 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1380 kg | 1571 kg |
Vehicle Length | 4850 mm | 4770 mm |
Vehicle Width | 1900 mm | 1820 mm |
Vehicle Height | 1410 mm | 1490 mm |
Wheelbase Size | 2830 mm | 2710 mm |