1977 Holden Kingswood vs. 2003 Toyota Allion
To start off, 2003 Toyota Allion is newer by 26 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 1977 Holden Kingswood (213 HP @ 4800 RPM) has 99 more horse power than 2003 Toyota Allion. (114 HP @ 6000 RPM). In normal driving conditions, 1977 Holden Kingswood should accelerate faster than 2003 Toyota Allion. With that said, vehicle weight also plays an important factor in acceleration. 1977 Holden Kingswood weights approximately 240 kg more than 2003 Toyota Allion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Holden Kingswood is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Holden Kingswood. However, in wet, icy, snow, or gravel driving conditions, 2003 Toyota Allion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (400 Nm @ 3100 RPM) has 250 more torque (in Nm) than 2003 Toyota Allion. (150 Nm @ 4200 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 2003 Toyota Allion. 2003 Toyota Allion has automatic transmission and 1977 Holden Kingswood has manual transmission. 1977 Holden Kingswood will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Toyota Allion will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Holden Kingswood | 2003 Toyota Allion | |
Make | Holden | Toyota |
Model | Kingswood | Allion |
Year Released | 1977 | 2003 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 1497 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 213 HP | 114 HP |
Engine RPM | 4800 RPM | 6000 RPM |
Torque | 400 Nm | 150 Nm |
Torque RPM | 3100 RPM | 4200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1380 kg | 1140 kg |
Vehicle Length | 4850 mm | 4560 mm |
Vehicle Width | 1900 mm | 1700 mm |
Vehicle Height | 1410 mm | 1480 mm |
Wheelbase Size | 2830 mm | 2710 mm |