1977 Holden Kingswood vs. 2010 BMW 325
To start off, 2010 BMW 325 is newer by 33 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 1977 Holden Kingswood (213 HP @ 4800 RPM) has 19 more horse power than 2010 BMW 325. (194 HP @ 4000 RPM). In normal driving conditions, 1977 Holden Kingswood should accelerate faster than 2010 BMW 325. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 325 weights approximately 210 kg more than 1977 Holden Kingswood.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 400 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
1977 Holden Kingswood | 2010 BMW 325 | |
Make | Holden | BMW |
Model | Kingswood | 325 |
Year Released | 1977 | 2010 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 2494 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 213 HP | 194 HP |
Engine RPM | 4800 RPM | 4000 RPM |
Torque | 400 Nm | 400 Nm |
Torque RPM | 3100 RPM | 3250 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1380 kg | 1590 kg |
Vehicle Length | 4850 mm | 4540 mm |
Vehicle Width | 1900 mm | 1820 mm |
Vehicle Height | 1410 mm | 1430 mm |
Wheelbase Size | 2830 mm | 2770 mm |