1977 Holden Kingswood vs. 2010 Buick Lucerne
To start off, 2010 Buick Lucerne is newer by 33 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 2010 Buick Lucerne (227 HP @ 5700 RPM) has 14 more horse power than 1977 Holden Kingswood. (213 HP @ 4800 RPM) In normal driving conditions, 2010 Buick Lucerne should accelerate faster than 1977 Holden Kingswood. With that said, vehicle weight also plays an important factor in acceleration. 2010 Buick Lucerne weights approximately 346 kg more than 1977 Holden Kingswood. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Holden Kingswood is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Holden Kingswood. However, in wet, icy, snow, or gravel driving conditions, 2010 Buick Lucerne, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (400 Nm @ 3100 RPM) has 79 more torque (in Nm) than 2010 Buick Lucerne. (321 Nm @ 3200 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 2010 Buick Lucerne. 2010 Buick Lucerne has automatic transmission and 1977 Holden Kingswood has manual transmission. 1977 Holden Kingswood will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Buick Lucerne will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Holden Kingswood | 2010 Buick Lucerne | |
Make | Holden | Buick |
Model | Kingswood | Lucerne |
Year Released | 1977 | 2010 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 3900 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 213 HP | 227 HP |
Engine RPM | 4800 RPM | 5700 RPM |
Torque | 400 Nm | 321 Nm |
Torque RPM | 3100 RPM | 3200 RPM |
Fuel Type | Gasoline | Flex Fuel |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1380 kg | 1726 kg |
Vehicle Length | 4850 mm | 5161 mm |
Vehicle Width | 1900 mm | 1875 mm |
Vehicle Height | 1410 mm | 1473 mm |
Wheelbase Size | 2830 mm | 2936 mm |