1977 Holden Kingswood vs. 2010 Dodge Journey
To start off, 2010 Dodge Journey is newer by 33 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 2010 Dodge Journey (235 HP @ 6400 RPM) has 22 more horse power than 1977 Holden Kingswood. (213 HP @ 4800 RPM) In normal driving conditions, 2010 Dodge Journey should accelerate faster than 1977 Holden Kingswood. With that said, vehicle weight also plays an important factor in acceleration. 2010 Dodge Journey weights approximately 463 kg more than 1977 Holden Kingswood. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Holden Kingswood is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Holden Kingswood. However, in wet, icy, snow, or gravel driving conditions, 2010 Dodge Journey, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (400 Nm @ 3100 RPM) has 86 more torque (in Nm) than 2010 Dodge Journey. (314 Nm @ 4000 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 2010 Dodge Journey. 2010 Dodge Journey has automatic transmission and 1977 Holden Kingswood has manual transmission. 1977 Holden Kingswood will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Dodge Journey will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Holden Kingswood | 2010 Dodge Journey | |
Make | Holden | Dodge |
Model | Kingswood | Journey |
Year Released | 1977 | 2010 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 3500 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 213 HP | 235 HP |
Engine RPM | 4800 RPM | 6400 RPM |
Torque | 400 Nm | 314 Nm |
Torque RPM | 3100 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1380 kg | 1843 kg |
Vehicle Length | 4850 mm | 4887 mm |
Vehicle Width | 1900 mm | 1834 mm |
Wheelbase Size | 2830 mm | 2891 mm |