1977 Holden Kingswood vs. 2010 Mercedes-Benz ML
To start off, 2010 Mercedes-Benz ML is newer by 33 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 2010 Mercedes-Benz ML (268 HP @ 6000 RPM) has 55 more horse power than 1977 Holden Kingswood. (213 HP @ 4800 RPM) In normal driving conditions, 2010 Mercedes-Benz ML should accelerate faster than 1977 Holden Kingswood. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mercedes-Benz ML weights approximately 721 kg more than 1977 Holden Kingswood. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Mercedes-Benz ML is four wheel drive (4WD), it will have significant more traction and grip than 1977 Holden Kingswood. In wet, icy, snow, or gravel driving conditions, 2010 Mercedes-Benz ML will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (400 Nm @ 3100 RPM) has 51 more torque (in Nm) than 2010 Mercedes-Benz ML. (349 Nm @ 2400 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 2010 Mercedes-Benz ML. 2010 Mercedes-Benz ML has automatic transmission and 1977 Holden Kingswood has manual transmission. 1977 Holden Kingswood will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mercedes-Benz ML will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Holden Kingswood | 2010 Mercedes-Benz ML | |
Make | Holden | Mercedes-Benz |
Model | Kingswood | ML |
Year Released | 1977 | 2010 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 3500 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 213 HP | 268 HP |
Engine RPM | 4800 RPM | 6000 RPM |
Torque | 400 Nm | 349 Nm |
Torque RPM | 3100 RPM | 2400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1380 kg | 2101 kg |
Vehicle Length | 4850 mm | 4780 mm |
Vehicle Width | 1900 mm | 1910 mm |
Vehicle Height | 1410 mm | 1816 mm |
Wheelbase Size | 2830 mm | 2913 mm |