1978 Audi 100 vs. 1992 Rover 220

To start off, 1992 Rover 220 is newer by 14 year(s). Which means there will be less support and parts availability for 1978 Audi 100. In addition, the cost of maintenance, including insurance, on 1978 Audi 100 would be higher. At 1,994 cc (4 cylinders), 1992 Rover 220 is equipped with a bigger engine. In terms of performance, 1992 Rover 220 (138 HP @ 6000 RPM) has 68 more horse power than 1978 Audi 100. (70 HP @ 4800 RPM) In normal driving conditions, 1992 Rover 220 should accelerate faster than 1978 Audi 100. With that said, vehicle weight also plays an important factor in acceleration. 1978 Audi 100 weights approximately 57 kg more than 1992 Rover 220.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Rover 220 (180 Nm @ 2500 RPM) has 55 more torque (in Nm) than 1978 Audi 100. (125 Nm @ 3000 RPM). This means 1992 Rover 220 will have an easier job in driving up hills or pulling heavy equipment than 1978 Audi 100.

Compare all specifications:

1978 Audi 100 1992 Rover 220
Make Audi Rover
Model 100 220
Year Released 1978 1992
Engine Position Front Front
Engine Size 1986 cc 1994 cc
Engine Cylinders 5 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 70 HP 138 HP
Engine RPM 4800 RPM 6000 RPM
Torque 125 Nm 180 Nm
Torque RPM 3000 RPM 2500 RPM
Engine Bore Size 76.5 mm 84.5 mm
Engine Stroke Size 86.4 mm 89 mm
Engine Compression Ratio 23.0:1 10.0:1
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1210 kg 1153 kg
Vehicle Length 4690 mm 4260 mm
Vehicle Width 1770 mm 1690 mm
Vehicle Height 1400 mm 1380 mm
Wheelbase Size 2680 mm 2560 mm
Fuel Tank Capacity 60 L 55 L