1978 BMW 725 vs. 1990 Fiat Tempra

To start off, 1990 Fiat Tempra is newer by 12 year(s). Which means there will be less support and parts availability for 1978 BMW 725. In addition, the cost of maintenance, including insurance, on 1978 BMW 725 would be higher. At 2,495 cc (6 cylinders), 1978 BMW 725 is equipped with a bigger engine. In terms of performance, 1978 BMW 725 (148 HP @ 5500 RPM) has 76 more horse power than 1990 Fiat Tempra. (72 HP @ 5800 RPM). In normal driving conditions, 1978 BMW 725 should accelerate faster than 1990 Fiat Tempra.

Because 1978 BMW 725 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1978 BMW 725. However, in wet, icy, snow, or gravel driving conditions, 1990 Fiat Tempra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 BMW 725 (215 Nm @ 4000 RPM) has 106 more torque (in Nm) than 1990 Fiat Tempra. (109 Nm @ 2900 RPM). This means 1978 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 1990 Fiat Tempra.

Compare all specifications:

1978 BMW 725 1990 Fiat Tempra
Make BMW Fiat
Model 725 Tempra
Year Released 1978 1990
Body Type Sedan Station Wagon
Engine Position Front Front
Engine Size 2495 cc 1372 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 148 HP 72 HP
Engine RPM 5500 RPM 5800 RPM
Torque 215 Nm 109 Nm
Torque RPM 4000 RPM 2900 RPM
Engine Bore Size 86.1 mm 80.5 mm
Engine Stroke Size 71.6 mm 67.4 mm
Engine Compression Ratio 9.6:1 9.2:1
Drive Type Rear Front
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Length 4870 mm 4470 mm
Vehicle Width 1810 mm 1710 mm
Vehicle Height 1440 mm 1450 mm
Wheelbase Size 2810 mm 2550 mm