1978 BMW 725 vs. 2000 Ferrari 360
To start off, 2000 Ferrari 360 is newer by 22 year(s). Which means there will be less support and parts availability for 1978 BMW 725. In addition, the cost of maintenance, including insurance, on 1978 BMW 725 would be higher. At 3,585 cc (8 cylinders), 2000 Ferrari 360 is equipped with a bigger engine. In terms of performance, 2000 Ferrari 360 (400 HP @ 8250 RPM) has 252 more horse power than 1978 BMW 725. (148 HP @ 5500 RPM) In normal driving conditions, 2000 Ferrari 360 should accelerate faster than 1978 BMW 725.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Ferrari 360 (373 Nm @ 4750 RPM) has 158 more torque (in Nm) than 1978 BMW 725. (215 Nm @ 4000 RPM). This means 2000 Ferrari 360 will have an easier job in driving up hills or pulling heavy equipment than 1978 BMW 725.
Compare all specifications:
1978 BMW 725 | 2000 Ferrari 360 | |
Make | BMW | Ferrari |
Model | 725 | 360 |
Year Released | 1978 | 2000 |
Body Type | Sedan | Convertible |
Engine Position | Front | Middle |
Engine Size | 2495 cc | 3585 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 5 valves |
Horse Power | 148 HP | 400 HP |
Engine RPM | 5500 RPM | 8250 RPM |
Torque | 215 Nm | 373 Nm |
Torque RPM | 4000 RPM | 4750 RPM |
Engine Bore Size | 86.1 mm | 85 mm |
Engine Stroke Size | 71.6 mm | 79 mm |
Engine Compression Ratio | 9.6:1 | 11.0:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 4870 mm | 4480 mm |
Vehicle Width | 1810 mm | 1930 mm |
Vehicle Height | 1440 mm | 1220 mm |
Wheelbase Size | 2810 mm | 2610 mm |