1978 BMW 725 vs. 2003 Honda Avancier
To start off, 2003 Honda Avancier is newer by 25 year(s). Which means there will be less support and parts availability for 1978 BMW 725. In addition, the cost of maintenance, including insurance, on 1978 BMW 725 would be higher. At 2,495 cc (6 cylinders), 1978 BMW 725 is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.
Because 2003 Honda Avancier is four wheel drive (4WD), it will have significant more traction and grip than 1978 BMW 725. In wet, icy, snow, or gravel driving conditions, 2003 Honda Avancier will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 BMW 725 (215 Nm @ 4000 RPM) has 10 more torque (in Nm) than 2003 Honda Avancier. (205 Nm @ 4800 RPM). This means 1978 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 2003 Honda Avancier.
Compare all specifications:
1978 BMW 725 | 2003 Honda Avancier | |
Make | BMW | Honda |
Model | 725 | Avancier |
Year Released | 1978 | 2003 |
Engine Position | Front | Front |
Engine Size | 2495 cc | 2254 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 148 HP |
Engine RPM | 5500 RPM | 5800 RPM |
Torque | 215 Nm | 205 Nm |
Torque RPM | 4000 RPM | 4800 RPM |
Engine Bore Size | 86.1 mm | 86 mm |
Engine Stroke Size | 71.6 mm | 97 mm |
Engine Compression Ratio | 9.6:1 | 9.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 4870 mm | 4710 mm |
Vehicle Width | 1810 mm | 1820 mm |
Vehicle Height | 1440 mm | 1550 mm |
Wheelbase Size | 2810 mm | 2770 mm |