1978 Chevrolet Corvette vs. 2009 GMC Acadia

To start off, 2009 GMC Acadia is newer by 31 year(s). Which means there will be less support and parts availability for 1978 Chevrolet Corvette. In addition, the cost of maintenance, including insurance, on 1978 Chevrolet Corvette would be higher. At 5,765 cc (8 cylinders), 1978 Chevrolet Corvette is equipped with a bigger engine.

Because 1978 Chevrolet Corvette is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1978 Chevrolet Corvette. However, in wet, icy, snow, or gravel driving conditions, 2009 GMC Acadia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Chevrolet Corvette (380 Nm) has 14 more torque (in Nm) than 2009 GMC Acadia. (366 Nm). This means 1978 Chevrolet Corvette will have an easier job in driving up hills or pulling heavy equipment than 2009 GMC Acadia. 2009 GMC Acadia has automatic transmission and 1978 Chevrolet Corvette has manual transmission. 1978 Chevrolet Corvette will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 GMC Acadia will be easier to drive especially in heavy traffic.

Compare all specifications:

1978 Chevrolet Corvette 2009 GMC Acadia
Make Chevrolet GMC
Model Corvette Acadia
Year Released 1978 2009
Body Type Coupe SUV
Engine Position Front Front
Engine Size 5765 cc 3600 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type V V
Valves per Cylinder 2 valves 4 valves
Horse Power 0 HP 288 HP
Torque 380 Nm 366 Nm
Engine Compression Ratio 8.2:1 9.2:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 7 seats
Number of Doors 2 doors 5 doors
Vehicle Length 4710 mm 5100 mm
Vehicle Width 1760 mm 1990 mm
Vehicle Height 1220 mm 1780 mm
Wheelbase Size 2500 mm 3030 mm