1978 Chrysler 160 vs. 2010 BMW 325

To start off, 2010 BMW 325 is newer by 32 year(s). Which means there will be less support and parts availability for 1978 Chrysler 160. In addition, the cost of maintenance, including insurance, on 1978 Chrysler 160 would be higher. At 2,494 cc (6 cylinders), 2010 BMW 325 is equipped with a bigger engine. In terms of performance, 2010 BMW 325 (194 HP @ 4000 RPM) has 105 more horse power than 1978 Chrysler 160. (89 HP @ 5800 RPM) In normal driving conditions, 2010 BMW 325 should accelerate faster than 1978 Chrysler 160. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 325 weights approximately 511 kg more than 1978 Chrysler 160. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 325 (400 Nm @ 1300 RPM) has 267 more torque (in Nm) than 1978 Chrysler 160. (133 Nm @ 3400 RPM). This means 2010 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 1978 Chrysler 160.

Compare all specifications:

1978 Chrysler 160 2010 BMW 325
Make Chrysler BMW
Model 160 325
Year Released 1978 2010
Engine Position Front Front
Engine Size 1639 cc 2494 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 89 HP 194 HP
Engine RPM 5800 RPM 4000 RPM
Torque 133 Nm 400 Nm
Torque RPM 3400 RPM 1300 RPM
Fuel Type Gasoline Diesel
Drive Type Rear Rear
Number of Seats 5 seats 4 seats
Vehicle Weight 1085 kg 1596 kg
Vehicle Length 4540 mm 4590 mm
Vehicle Width 1730 mm 1790 mm
Vehicle Height 1440 mm 1380 mm
Wheelbase Size 2680 mm 2770 mm