1978 Chrysler Avenger vs. 1952 Jeep CJ3A

To start off, 1978 Chrysler Avenger is newer by 26 year(s). Which means there will be less support and parts availability for 1952 Jeep CJ3A. In addition, the cost of maintenance, including insurance, on 1952 Jeep CJ3A would be higher. At 2,199 cc (4 cylinders), 1952 Jeep CJ3A is equipped with a bigger engine. In terms of performance, 1978 Chrysler Avenger (70 HP @ 5600 RPM) has 11 more horse power than 1952 Jeep CJ3A. (59 HP @ 3600 RPM). In normal driving conditions, 1978 Chrysler Avenger should accelerate faster than 1952 Jeep CJ3A. With that said, vehicle weight also plays an important factor in acceleration. 1952 Jeep CJ3A weights approximately 210 kg more than 1978 Chrysler Avenger.

Because 1952 Jeep CJ3A is four wheel drive (4WD), it will have significant more traction and grip than 1978 Chrysler Avenger. In wet, icy, snow, or gravel driving conditions, 1952 Jeep CJ3A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1952 Jeep CJ3A (145 Nm @ 3600 RPM) has 49 more torque (in Nm) than 1978 Chrysler Avenger. (96 Nm @ 4800 RPM). This means 1952 Jeep CJ3A will have an easier job in driving up hills or pulling heavy equipment than 1978 Chrysler Avenger.

Compare all specifications:

1978 Chrysler Avenger 1952 Jeep CJ3A
Make Chrysler Jeep
Model Avenger CJ3A
Year Released 1978 1952
Engine Position Front Front
Engine Size 1295 cc 2199 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 70 HP 59 HP
Engine RPM 5600 RPM 3600 RPM
Torque 96 Nm 145 Nm
Torque RPM 4800 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Manual
Vehicle Weight 900 kg 1110 kg
Vehicle Length 4150 mm 3130 mm
Vehicle Width 1620 mm 1460 mm
Vehicle Height 1420 mm 1630 mm
Wheelbase Size 2500 mm 2040 mm