1978 Chrysler Avenger vs. 2010 Saab 03-Sep
To start off, 2010 Saab 03-Sep is newer by 32 year(s). Which means there will be less support and parts availability for 1978 Chrysler Avenger. In addition, the cost of maintenance, including insurance, on 1978 Chrysler Avenger would be higher. At 2,000 cc (4 cylinders), 2010 Saab 03-Sep is equipped with a bigger engine. In terms of performance, 2010 Saab 03-Sep (207 HP @ 5300 RPM) has 137 more horse power than 1978 Chrysler Avenger. (70 HP @ 5600 RPM) In normal driving conditions, 2010 Saab 03-Sep should accelerate faster than 1978 Chrysler Avenger.
Because 1978 Chrysler Avenger is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1978 Chrysler Avenger. However, in wet, icy, snow, or gravel driving conditions, 2010 Saab 03-Sep, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Saab 03-Sep (299 Nm @ 2500 RPM) has 203 more torque (in Nm) than 1978 Chrysler Avenger. (96 Nm @ 4800 RPM). This means 2010 Saab 03-Sep will have an easier job in driving up hills or pulling heavy equipment than 1978 Chrysler Avenger.
Compare all specifications:
1978 Chrysler Avenger | 2010 Saab 03-Sep | |
Make | Chrysler | Saab |
Model | Avenger | 03-Sep |
Year Released | 1978 | 2010 |
Engine Position | Front | Front |
Engine Size | 1295 cc | 2000 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 70 HP | 207 HP |
Engine RPM | 5600 RPM | 5300 RPM |
Torque | 96 Nm | 299 Nm |
Torque RPM | 4800 RPM | 2500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Vehicle Length | 4150 mm | 4646 mm |
Vehicle Width | 1620 mm | 1781 mm |
Vehicle Height | 1420 mm | 1438 mm |
Wheelbase Size | 2500 mm | 2675 mm |