1978 Chrysler Cordoba vs. 1967 Lancia Fulvia
To start off, 1978 Chrysler Cordoba is newer by 11 year(s). Which means there will be less support and parts availability for 1967 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1967 Lancia Fulvia would be higher. At 5,201 cc (8 cylinders), 1978 Chrysler Cordoba is equipped with a bigger engine. In terms of performance, 1978 Chrysler Cordoba (133 HP @ 4000 RPM) has 33 more horse power than 1967 Lancia Fulvia. (100 HP @ 6000 RPM). In normal driving conditions, 1978 Chrysler Cordoba should accelerate faster than 1967 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1978 Chrysler Cordoba weights approximately 850 kg more than 1967 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1978 Chrysler Cordoba is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1978 Chrysler Cordoba. However, in wet, icy, snow, or gravel driving conditions, 1967 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Chrysler Cordoba (334 Nm @ 1600 RPM) has 214 more torque (in Nm) than 1967 Lancia Fulvia. (120 Nm @ 5000 RPM). This means 1978 Chrysler Cordoba will have an easier job in driving up hills or pulling heavy equipment than 1967 Lancia Fulvia. 1978 Chrysler Cordoba has automatic transmission and 1967 Lancia Fulvia has manual transmission. 1967 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1978 Chrysler Cordoba will be easier to drive especially in heavy traffic.
Compare all specifications:
1978 Chrysler Cordoba | 1967 Lancia Fulvia | |
Make | Chrysler | Lancia |
Model | Cordoba | Fulvia |
Year Released | 1978 | 1967 |
Body Type | Coupe | Coupe |
Engine Position | Front | Front |
Engine Size | 5201 cc | 1298 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 133 HP | 100 HP |
Engine RPM | 4000 RPM | 6000 RPM |
Torque | 334 Nm | 120 Nm |
Torque RPM | 1600 RPM | 5000 RPM |
Engine Bore Size | 99.3 mm | 70.8 mm |
Engine Stroke Size | 84.1 mm | 78.8 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1820 kg | 970 kg |
Vehicle Length | 5480 mm | 3990 mm |
Vehicle Width | 1970 mm | 1570 mm |
Vehicle Height | 1350 mm | 1330 mm |
Wheelbase Size | 2930 mm | 2340 mm |