1978 Daihatsu Taft vs. 1960 Isuzu Minx
To start off, 1978 Daihatsu Taft is newer by 18 year(s). Which means there will be less support and parts availability for 1960 Isuzu Minx. In addition, the cost of maintenance, including insurance, on 1960 Isuzu Minx would be higher. At 2,530 cc (4 cylinders), 1978 Daihatsu Taft is equipped with a bigger engine. In terms of performance, both vehicles can yield 62 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1978 Daihatsu Taft weights approximately 155 kg more than 1960 Isuzu Minx.
Because 1978 Daihatsu Taft is four wheel drive (4WD), it will have significant more traction and grip than 1960 Isuzu Minx. In wet, icy, snow, or gravel driving conditions, 1978 Daihatsu Taft will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Daihatsu Taft (150 Nm @ 2200 RPM) has 37 more torque (in Nm) than 1960 Isuzu Minx. (113 Nm @ 2400 RPM). This means 1978 Daihatsu Taft will have an easier job in driving up hills or pulling heavy equipment than 1960 Isuzu Minx.
Compare all specifications:
1978 Daihatsu Taft | 1960 Isuzu Minx | |
Make | Daihatsu | Isuzu |
Model | Taft | Minx |
Year Released | 1978 | 1960 |
Engine Size | 2530 cc | 1491 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 62 HP | 62 HP |
Engine RPM | 3600 RPM | 5000 RPM |
Torque | 150 Nm | 113 Nm |
Torque RPM | 2200 RPM | 2400 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1185 kg | 1030 kg |
Vehicle Length | 3370 mm | 4120 mm |
Vehicle Width | 1470 mm | 1550 mm |
Vehicle Height | 1830 mm | 1520 mm |
Wheelbase Size | 2030 mm | 2440 mm |