1978 Fiat 127 vs. 2012 Ford Crown Victoria
To start off, 2012 Ford Crown Victoria is newer by 34 year(s). Which means there will be less support and parts availability for 1978 Fiat 127. In addition, the cost of maintenance, including insurance, on 1978 Fiat 127 would be higher. At 4,605 cc (8 cylinders), 2012 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2012 Ford Crown Victoria (224 HP @ 4750 RPM) has 180 more horse power than 1978 Fiat 127. (44 HP @ 5600 RPM) In normal driving conditions, 2012 Ford Crown Victoria should accelerate faster than 1978 Fiat 127. With that said, vehicle weight also plays an important factor in acceleration. 2012 Ford Crown Victoria weights approximately 2151 kg more than 1978 Fiat 127. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1978 Fiat 127, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Ford Crown Victoria (359 Nm @ 4000 RPM) has 295 more torque (in Nm) than 1978 Fiat 127. (64 Nm @ 3000 RPM). This means 2012 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1978 Fiat 127. 2012 Ford Crown Victoria has automatic transmission and 1978 Fiat 127 has manual transmission. 1978 Fiat 127 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1978 Fiat 127 | 2012 Ford Crown Victoria | |
Make | Fiat | Ford |
Model | 127 | Crown Victoria |
Year Released | 1978 | 2012 |
Engine Position | Front | Front |
Engine Size | 903 cc | 4605 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 44 HP | 224 HP |
Engine RPM | 5600 RPM | 4750 RPM |
Torque | 64 Nm | 359 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Engine Bore Size | 65 mm | 90.2 mm |
Engine Stroke Size | 67.7 mm | 90 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 705 kg | 2856 kg |
Vehicle Length | 3650 mm | 5390 mm |
Vehicle Width | 1530 mm | 1970 mm |
Vehicle Height | 1370 mm | 1450 mm |
Wheelbase Size | 2230 mm | 2920 mm |