1978 Fiat Strada vs. 1977 Holden Kingswood
To start off, 1978 Fiat Strada is newer by 1 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 5,042 cc (8 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 1977 Holden Kingswood (213 HP @ 4800 RPM) has 153 more horse power than 1978 Fiat Strada. (60 HP @ 4200 RPM) In normal driving conditions, 1977 Holden Kingswood should accelerate faster than 1978 Fiat Strada. With that said, vehicle weight also plays an important factor in acceleration. 1977 Holden Kingswood weights approximately 560 kg more than 1978 Fiat Strada. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Holden Kingswood is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Holden Kingswood. However, in wet, icy, snow, or gravel driving conditions, 1978 Fiat Strada, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (400 Nm) has 309 more torque (in Nm) than 1978 Fiat Strada. (91 Nm). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 1978 Fiat Strada. 1978 Fiat Strada has automatic transmission and 1977 Holden Kingswood has manual transmission. 1977 Holden Kingswood will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1978 Fiat Strada will be easier to drive especially in heavy traffic.
Compare all specifications:
1978 Fiat Strada | 1977 Holden Kingswood | |
Make | Fiat | Holden |
Model | Strada | Kingswood |
Year Released | 1978 | 1977 |
Engine Position | Front | Front |
Engine Size | 1288 cc | 5042 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 60 HP | 213 HP |
Engine RPM | 4200 RPM | 4800 RPM |
Torque | 91 Nm | 400 Nm |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 820 kg | 1380 kg |
Vehicle Length | 4100 mm | 4850 mm |
Vehicle Width | 1660 mm | 1900 mm |
Vehicle Height | 1350 mm | 1410 mm |
Wheelbase Size | 2460 mm | 2830 mm |