1978 Ford Crown Victoria vs. 1979 Lancia Delta
To start off, 1979 Lancia Delta is newer by 1 year(s). Which means there will be less support and parts availability for 1978 Ford Crown Victoria. In addition, the cost of maintenance, including insurance, on 1978 Ford Crown Victoria would be higher. At 4,942 cc (8 cylinders), 1978 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 1978 Ford Crown Victoria (129 HP @ 3600 RPM) has 44 more horse power than 1979 Lancia Delta. (85 HP @ 5800 RPM). In normal driving conditions, 1978 Ford Crown Victoria should accelerate faster than 1979 Lancia Delta. With that said, vehicle weight also plays an important factor in acceleration. 1978 Ford Crown Victoria weights approximately 734 kg more than 1979 Lancia Delta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1978 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1978 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1979 Lancia Delta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Ford Crown Victoria (302 Nm @ 2600 RPM) has 179 more torque (in Nm) than 1979 Lancia Delta. (123 Nm @ 3500 RPM). This means 1978 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1979 Lancia Delta. 1978 Ford Crown Victoria has automatic transmission and 1979 Lancia Delta has manual transmission. 1979 Lancia Delta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1978 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1978 Ford Crown Victoria | 1979 Lancia Delta | |
Make | Ford | Lancia |
Model | Crown Victoria | Delta |
Year Released | 1978 | 1979 |
Engine Position | Front | Front |
Engine Size | 4942 cc | 1498 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 129 HP | 85 HP |
Engine RPM | 3600 RPM | 5800 RPM |
Torque | 302 Nm | 123 Nm |
Torque RPM | 2600 RPM | 3500 RPM |
Engine Bore Size | 101.6 mm | 86.4 mm |
Engine Stroke Size | 76.2 mm | 63.9 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1644 kg | 910 kg |
Vehicle Length | 5320 mm | 3890 mm |
Vehicle Width | 1980 mm | 1630 mm |
Vehicle Height | 1390 mm | 1390 mm |
Wheelbase Size | 2910 mm | 2480 mm |