1978 Peugeot 305 vs. 1977 Holden Statesman
To start off, 1978 Peugeot 305 is newer by 1 year(s). Which means there will be less support and parts availability for 1977 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1977 Holden Statesman would be higher. At 5,042 cc (8 cylinders), 1977 Holden Statesman is equipped with a bigger engine. In terms of performance, 1977 Holden Statesman (214 HP @ 4800 RPM) has 120 more horse power than 1978 Peugeot 305. (94 HP @ 6000 RPM) In normal driving conditions, 1977 Holden Statesman should accelerate faster than 1978 Peugeot 305. With that said, vehicle weight also plays an important factor in acceleration. 1977 Holden Statesman weights approximately 570 kg more than 1978 Peugeot 305. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1978 Peugeot 305, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Statesman (400 Nm @ 3100 RPM) has 268 more torque (in Nm) than 1978 Peugeot 305. (132 Nm @ 3750 RPM). This means 1977 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1978 Peugeot 305. 1977 Holden Statesman has automatic transmission and 1978 Peugeot 305 has manual transmission. 1978 Peugeot 305 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1977 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
1978 Peugeot 305 | 1977 Holden Statesman | |
Make | Peugeot | Holden |
Model | 305 | Statesman |
Year Released | 1978 | 1977 |
Engine Position | Front | Front |
Engine Size | 1548 cc | 5042 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 94 HP | 214 HP |
Engine RPM | 6000 RPM | 4800 RPM |
Torque | 132 Nm | 400 Nm |
Torque RPM | 3750 RPM | 3100 RPM |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 975 kg | 1545 kg |
Vehicle Length | 4250 mm | 5190 mm |
Vehicle Width | 1640 mm | 1890 mm |
Vehicle Height | 1410 mm | 1400 mm |
Wheelbase Size | 2750 mm | 2900 mm |