1979 Autobianchi A 112 vs. 1969 Bristol 410
To start off, 1979 Autobianchi A 112 is newer by 10 year(s). Which means there will be less support and parts availability for 1969 Bristol 410. In addition, the cost of maintenance, including insurance, on 1969 Bristol 410 would be higher. At 5,211 cc (8 cylinders), 1969 Bristol 410 is equipped with a bigger engine. In terms of performance, 1969 Bristol 410 (215 HP @ 4400 RPM) has 158 more horse power than 1979 Autobianchi A 112. (57 HP @ 6600 RPM) In normal driving conditions, 1969 Bristol 410 should accelerate faster than 1979 Autobianchi A 112. With that said, vehicle weight also plays an important factor in acceleration. 1969 Bristol 410 weights approximately 925 kg more than 1979 Autobianchi A 112. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1969 Bristol 410 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1969 Bristol 410. However, in wet, icy, snow, or gravel driving conditions, 1979 Autobianchi A 112, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Bristol 410 (463 Nm @ 2800 RPM) has 390 more torque (in Nm) than 1979 Autobianchi A 112. (73 Nm @ 3800 RPM). This means 1969 Bristol 410 will have an easier job in driving up hills or pulling heavy equipment than 1979 Autobianchi A 112. 1969 Bristol 410 has automatic transmission and 1979 Autobianchi A 112 has manual transmission. 1979 Autobianchi A 112 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1969 Bristol 410 will be easier to drive especially in heavy traffic.
Compare all specifications:
1979 Autobianchi A 112 | 1969 Bristol 410 | |
Make | Autobianchi | Bristol |
Model | A 112 | 410 |
Year Released | 1979 | 1969 |
Engine Position | Front | Front |
Engine Size | 928 cc | 5211 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 57 HP | 215 HP |
Engine RPM | 6600 RPM | 4400 RPM |
Torque | 73 Nm | 463 Nm |
Torque RPM | 3800 RPM | 2800 RPM |
Engine Bore Size | 65 mm | 99.4 mm |
Engine Stroke Size | 74 mm | 84.1 mm |
Engine Compression Ratio | 10.0:1 | 9.0:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 3 doors | 2 doors |
Vehicle Weight | 675 kg | 1600 kg |
Vehicle Length | 3230 mm | 4920 mm |
Vehicle Width | 1490 mm | 1740 mm |
Vehicle Height | 1370 mm | 1510 mm |
Wheelbase Size | 2040 mm | 2910 mm |
Fuel Tank Capacity | 30 L | 81 L |