1979 BMW 633 vs. 2012 Fiat 500

To start off, 2012 Fiat 500 is newer by 33 year(s). Which means there will be less support and parts availability for 1979 BMW 633. In addition, the cost of maintenance, including insurance, on 1979 BMW 633 would be higher. At 3,210 cc (6 cylinders), 1979 BMW 633 is equipped with a bigger engine. In terms of performance, 1979 BMW 633 (194 HP @ 5500 RPM) has 126 more horse power than 2012 Fiat 500. (68 HP @ 5500 RPM). In normal driving conditions, 1979 BMW 633 should accelerate faster than 2012 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1979 BMW 633 weights approximately 530 kg more than 2012 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1979 BMW 633 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1979 BMW 633. However, in wet, icy, snow, or gravel driving conditions, 2012 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1979 BMW 633 (285 Nm @ 4300 RPM) has 183 more torque (in Nm) than 2012 Fiat 500. (102 Nm @ 3000 RPM). This means 1979 BMW 633 will have an easier job in driving up hills or pulling heavy equipment than 2012 Fiat 500. 2012 Fiat 500 has automatic transmission and 1979 BMW 633 has manual transmission. 1979 BMW 633 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Fiat 500 will be easier to drive especially in heavy traffic.

Compare all specifications:

1979 BMW 633 2012 Fiat 500
Make BMW Fiat
Model 633 500
Year Released 1979 2012
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 3210 cc 1242 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 194 HP 68 HP
Engine RPM 5500 RPM 5500 RPM
Torque 285 Nm 102 Nm
Torque RPM 4300 RPM 3000 RPM
Engine Bore Size 89 mm 70.8 mm
Engine Stroke Size 86 mm 78.9 mm
Engine Compression Ratio 9.3:1 11.1:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 1470 kg 940 kg
Vehicle Length 4760 mm 3550 mm
Vehicle Width 1760 mm 1630 mm
Vehicle Height 1390 mm 1490 mm
Wheelbase Size 2640 mm 2310 mm
Fuel Tank Capacity 70 L 35 L