1979 BMW 725 vs. 2007 Chevrolet Cobalt
To start off, 2007 Chevrolet Cobalt is newer by 28 year(s). Which means there will be less support and parts availability for 1979 BMW 725. In addition, the cost of maintenance, including insurance, on 1979 BMW 725 would be higher. At 2,495 cc (6 cylinders), 1979 BMW 725 is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.
Because 1979 BMW 725 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1979 BMW 725. However, in wet, icy, snow, or gravel driving conditions, 2007 Chevrolet Cobalt, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1979 BMW 725 (215 Nm @ 4000 RPM) has 9 more torque (in Nm) than 2007 Chevrolet Cobalt. (206 Nm @ 4200 RPM). This means 1979 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 2007 Chevrolet Cobalt.
Compare all specifications:
1979 BMW 725 | 2007 Chevrolet Cobalt | |
Make | BMW | Chevrolet |
Model | 725 | Cobalt |
Year Released | 1979 | 2007 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 2495 cc | 2201 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 148 HP |
Engine RPM | 5500 RPM | 5600 RPM |
Torque | 215 Nm | 206 Nm |
Torque RPM | 4000 RPM | 4200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 4870 mm | 4590 mm |
Vehicle Width | 1810 mm | 1730 mm |
Vehicle Height | 1440 mm | 1420 mm |
Wheelbase Size | 2810 mm | 2630 mm |