1979 BMW 725 vs. 2008 GMC Acadia
To start off, 2008 GMC Acadia is newer by 29 year(s). Which means there will be less support and parts availability for 1979 BMW 725. In addition, the cost of maintenance, including insurance, on 1979 BMW 725 would be higher. At 3,600 cc (6 cylinders), 2008 GMC Acadia is equipped with a bigger engine. In terms of performance, 2008 GMC Acadia (276 HP @ 6600 RPM) has 128 more horse power than 1979 BMW 725. (148 HP @ 5500 RPM) In normal driving conditions, 2008 GMC Acadia should accelerate faster than 1979 BMW 725.
Because 1979 BMW 725 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1979 BMW 725. However, in wet, icy, snow, or gravel driving conditions, 2008 GMC Acadia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Acadia (340 Nm @ 3200 RPM) has 125 more torque (in Nm) than 1979 BMW 725. (215 Nm @ 4000 RPM). This means 2008 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 1979 BMW 725.
Compare all specifications:
1979 BMW 725 | 2008 GMC Acadia | |
Make | BMW | GMC |
Model | 725 | Acadia |
Year Released | 1979 | 2008 |
Body Type | Sedan | SUV |
Engine Position | Front | Front |
Engine Size | 2495 cc | 3600 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 276 HP |
Engine RPM | 5500 RPM | 6600 RPM |
Torque | 215 Nm | 340 Nm |
Torque RPM | 4000 RPM | 3200 RPM |
Engine Compression Ratio | 9.6:1 | 10.2:1 |
Drive Type | Rear | Front |
Number of Seats | 5 seats | 8 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Length | 4870 mm | 5110 mm |
Vehicle Width | 1810 mm | 2010 mm |
Vehicle Height | 1440 mm | 1860 mm |
Wheelbase Size | 2810 mm | 3030 mm |