1979 BMW 725 vs. 2011 Mitsubishi Lancer

To start off, 2011 Mitsubishi Lancer is newer by 32 year(s). Which means there will be less support and parts availability for 1979 BMW 725. In addition, the cost of maintenance, including insurance, on 1979 BMW 725 would be higher. At 2,495 cc (6 cylinders), 1979 BMW 725 is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.

Because 1979 BMW 725 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1979 BMW 725. However, in wet, icy, snow, or gravel driving conditions, 2011 Mitsubishi Lancer, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1979 BMW 725 (215 Nm @ 4000 RPM) has 19 more torque (in Nm) than 2011 Mitsubishi Lancer. (196 Nm @ 4200 RPM). This means 1979 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 2011 Mitsubishi Lancer.

Compare all specifications:

1979 BMW 725 2011 Mitsubishi Lancer
Make BMW Mitsubishi
Model 725 Lancer
Year Released 1979 2011
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 2495 cc 2000 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 148 HP 148 HP
Engine RPM 5500 RPM 6000 RPM
Torque 215 Nm 196 Nm
Torque RPM 4000 RPM 4200 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Length 4870 mm 4582 mm
Vehicle Width 1810 mm 1763 mm
Vehicle Height 1440 mm 1516 mm
Wheelbase Size 2810 mm 2634 mm