1979 Chrysler 1609 vs. 1958 Tatra T603
To start off, 1979 Chrysler 1609 is newer by 21 year(s). Which means there will be less support and parts availability for 1958 Tatra T603. In addition, the cost of maintenance, including insurance, on 1958 Tatra T603 would be higher. At 2,545 cc (8 cylinders), 1958 Tatra T603 is equipped with a bigger engine. In terms of performance, 1979 Chrysler 1609 (100 HP @ 5800 RPM) has 6 more horse power than 1958 Tatra T603. (94 HP @ 5000 RPM). In normal driving conditions, 1979 Chrysler 1609 should accelerate faster than 1958 Tatra T603. With that said, vehicle weight also plays an important factor in acceleration. 1958 Tatra T603 weights approximately 370 kg more than 1979 Chrysler 1609.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Tatra T603 (158 Nm @ 3000 RPM) has 14 more torque (in Nm) than 1979 Chrysler 1609. (144 Nm @ 3800 RPM). This means 1958 Tatra T603 will have an easier job in driving up hills or pulling heavy equipment than 1979 Chrysler 1609.
Compare all specifications:
| 1979 Chrysler 1609 | 1958 Tatra T603 | |
| Make | Chrysler | Tatra |
| Model | 1609 | T603 |
| Year Released | 1979 | 1958 |
| Engine Position | Front | Rear |
| Engine Size | 1811 cc | 2545 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 100 HP | 94 HP |
| Engine RPM | 5800 RPM | 5000 RPM |
| Torque | 144 Nm | 158 Nm |
| Torque RPM | 3800 RPM | 3000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Vehicle Weight | 1100 kg | 1470 kg |
| Vehicle Length | 4530 mm | 5070 mm |
| Vehicle Width | 1740 mm | 1920 mm |
| Vehicle Height | 1450 mm | 1540 mm |
| Wheelbase Size | 2670 mm | 2760 mm |
