1979 Chrysler 1609 vs. 2010 Rolls-Royce Phantom Drophead Coupe
To start off, 2010 Rolls-Royce Phantom Drophead Coupe is newer by 31 year(s). Which means there will be less support and parts availability for 1979 Chrysler 1609. In addition, the cost of maintenance, including insurance, on 1979 Chrysler 1609 would be higher. At 6,700 cc (12 cylinders), 2010 Rolls-Royce Phantom Drophead Coupe is equipped with a bigger engine. In terms of performance, 2010 Rolls-Royce Phantom Drophead Coupe (453 HP @ 5350 RPM) has 353 more horse power than 1979 Chrysler 1609. (100 HP @ 5800 RPM) In normal driving conditions, 2010 Rolls-Royce Phantom Drophead Coupe should accelerate faster than 1979 Chrysler 1609. With that said, vehicle weight also plays an important factor in acceleration. 2010 Rolls-Royce Phantom Drophead Coupe weights approximately 1570 kg more than 1979 Chrysler 1609. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Rolls-Royce Phantom Drophead Coupe (719 Nm @ 3500 RPM) has 575 more torque (in Nm) than 1979 Chrysler 1609. (144 Nm @ 3800 RPM). This means 2010 Rolls-Royce Phantom Drophead Coupe will have an easier job in driving up hills or pulling heavy equipment than 1979 Chrysler 1609. 2010 Rolls-Royce Phantom Drophead Coupe has automatic transmission and 1979 Chrysler 1609 has manual transmission. 1979 Chrysler 1609 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Rolls-Royce Phantom Drophead Coupe will be easier to drive especially in heavy traffic.
Compare all specifications:
1979 Chrysler 1609 | 2010 Rolls-Royce Phantom Drophead Coupe | |
Make | Chrysler | Rolls-Royce |
Model | 1609 | Phantom Drophead Coupe |
Year Released | 1979 | 2010 |
Engine Position | Front | Front |
Engine Size | 1811 cc | 6700 cc |
Engine Cylinders | 4 cylinders | 12 cylinders |
Engine Type | in-line | V |
Horse Power | 100 HP | 453 HP |
Engine RPM | 5800 RPM | 5350 RPM |
Torque | 144 Nm | 719 Nm |
Torque RPM | 3800 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Vehicle Weight | 1100 kg | 2670 kg |
Vehicle Length | 4530 mm | 5608 mm |
Vehicle Width | 1740 mm | 1986 mm |
Vehicle Height | 1450 mm | 1580 mm |
Wheelbase Size | 2670 mm | 3320 mm |