1979 Chrysler Avenger vs. 2010 Mazda 5
To start off, 2010 Mazda 5 is newer by 31 year(s). Which means there will be less support and parts availability for 1979 Chrysler Avenger. In addition, the cost of maintenance, including insurance, on 1979 Chrysler Avenger would be higher. At 2,300 cc (4 cylinders), 2010 Mazda 5 is equipped with a bigger engine. In terms of performance, 2010 Mazda 5 (153 HP @ 6500 RPM) has 94 more horse power than 1979 Chrysler Avenger. (59 HP @ 5000 RPM) In normal driving conditions, 2010 Mazda 5 should accelerate faster than 1979 Chrysler Avenger. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda 5 weights approximately 698 kg more than 1979 Chrysler Avenger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1979 Chrysler Avenger is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1979 Chrysler Avenger. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 5, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda 5 (200 Nm @ 4500 RPM) has 107 more torque (in Nm) than 1979 Chrysler Avenger. (93 Nm @ 2600 RPM). This means 2010 Mazda 5 will have an easier job in driving up hills or pulling heavy equipment than 1979 Chrysler Avenger. 2010 Mazda 5 has automatic transmission and 1979 Chrysler Avenger has manual transmission. 1979 Chrysler Avenger will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mazda 5 will be easier to drive especially in heavy traffic.
Compare all specifications:
1979 Chrysler Avenger | 2010 Mazda 5 | |
Make | Chrysler | Mazda |
Model | Avenger | 5 |
Year Released | 1979 | 2010 |
Engine Position | Front | Front |
Engine Size | 1295 cc | 2300 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 59 HP | 153 HP |
Engine RPM | 5000 RPM | 6500 RPM |
Torque | 93 Nm | 200 Nm |
Torque RPM | 2600 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 880 kg | 1578 kg |
Vehicle Length | 4150 mm | 4610 mm |
Vehicle Width | 1620 mm | 1753 mm |
Vehicle Height | 1420 mm | 1631 mm |
Wheelbase Size | 2500 mm | 2751 mm |