1979 Daihatsu Taft vs. 2010 Chrysler 300

To start off, 2010 Chrysler 300 is newer by 31 year(s). Which means there will be less support and parts availability for 1979 Daihatsu Taft. In addition, the cost of maintenance, including insurance, on 1979 Daihatsu Taft would be higher. At 2,700 cc (6 cylinders), 2010 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2010 Chrysler 300 (178 HP @ 5500 RPM) has 134 more horse power than 1979 Daihatsu Taft. (44 HP @ 5400 RPM) In normal driving conditions, 2010 Chrysler 300 should accelerate faster than 1979 Daihatsu Taft. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler 300 weights approximately 670 kg more than 1979 Daihatsu Taft. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1979 Daihatsu Taft is four wheel drive (4WD), it will have significant more traction and grip than 2010 Chrysler 300. In wet, icy, snow, or gravel driving conditions, 1979 Daihatsu Taft will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler 300 (257 Nm @ 4000 RPM) has 194 more torque (in Nm) than 1979 Daihatsu Taft. (63 Nm @ 4200 RPM). This means 2010 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1979 Daihatsu Taft.

Compare all specifications:

1979 Daihatsu Taft 2010 Chrysler 300
Make Daihatsu Chrysler
Model Taft 300
Year Released 1979 2010
Engine Size 958 cc 2700 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 44 HP 178 HP
Engine RPM 5400 RPM 5500 RPM
Torque 63 Nm 257 Nm
Torque RPM 4200 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Vehicle Weight 1020 kg 1690 kg
Vehicle Length 3370 mm 4999 mm
Vehicle Width 1470 mm 1882 mm
Vehicle Height 1830 mm 1483 mm
Wheelbase Size 2030 mm 3048 mm