1979 Ford Crown Victoria vs. 1963 Lancia Fulvia
To start off, 1979 Ford Crown Victoria is newer by 16 year(s). Which means there will be less support and parts availability for 1963 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Fulvia would be higher. At 4,186 cc (8 cylinders), 1979 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 1979 Ford Crown Victoria (118 HP @ 3800 RPM) has 31 more horse power than 1963 Lancia Fulvia. (87 HP @ 6000 RPM). In normal driving conditions, 1979 Ford Crown Victoria should accelerate faster than 1963 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1979 Ford Crown Victoria weights approximately 560 kg more than 1963 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1979 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1979 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1963 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1979 Ford Crown Victoria (263 Nm @ 2200 RPM) has 149 more torque (in Nm) than 1963 Lancia Fulvia. (114 Nm @ 4500 RPM). This means 1979 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Fulvia. 1979 Ford Crown Victoria has automatic transmission and 1963 Lancia Fulvia has manual transmission. 1963 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1979 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1979 Ford Crown Victoria | 1963 Lancia Fulvia | |
| Make | Ford | Lancia |
| Model | Crown Victoria | Fulvia |
| Year Released | 1979 | 1963 |
| Engine Position | Front | Front |
| Engine Size | 4186 cc | 1298 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | V |
| Horse Power | 118 HP | 87 HP |
| Engine RPM | 3800 RPM | 6000 RPM |
| Torque | 263 Nm | 114 Nm |
| Torque RPM | 2200 RPM | 4500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1630 kg | 1070 kg |
| Vehicle Length | 5320 mm | 4120 mm |
| Vehicle Width | 1980 mm | 1560 mm |
| Vehicle Height | 1390 mm | 1400 mm |
| Wheelbase Size | 2910 mm | 2510 mm |
