1979 Lancia Beta vs. 1960 Studebaker Silver Hawk

To start off, 1979 Lancia Beta is newer by 19 year(s). Which means there will be less support and parts availability for 1960 Studebaker Silver Hawk. In addition, the cost of maintenance, including insurance, on 1960 Studebaker Silver Hawk would be higher. At 3,050 cc (6 cylinders), 1960 Studebaker Silver Hawk is equipped with a bigger engine. In terms of performance, 1979 Lancia Beta (118 HP @ 6000 RPM) has 17 more horse power than 1960 Studebaker Silver Hawk. (101 HP @ 4000 RPM). In normal driving conditions, 1979 Lancia Beta should accelerate faster than 1960 Studebaker Silver Hawk. With that said, vehicle weight also plays an important factor in acceleration. 1960 Studebaker Silver Hawk weights approximately 310 kg more than 1979 Lancia Beta.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1960 Studebaker Silver Hawk (206 Nm @ 1800 RPM) has 35 more torque (in Nm) than 1979 Lancia Beta. (171 Nm @ 3400 RPM). This means 1960 Studebaker Silver Hawk will have an easier job in driving up hills or pulling heavy equipment than 1979 Lancia Beta. 1960 Studebaker Silver Hawk has automatic transmission and 1979 Lancia Beta has manual transmission. 1979 Lancia Beta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1960 Studebaker Silver Hawk will be easier to drive especially in heavy traffic.

Compare all specifications:

1979 Lancia Beta 1960 Studebaker Silver Hawk
Make Lancia Studebaker
Model Beta Silver Hawk
Year Released 1979 1960
Body Type Coupe Coupe
Engine Position Middle Front
Engine Size 1994 cc 3050 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 118 HP 101 HP
Engine RPM 6000 RPM 4000 RPM
Torque 171 Nm 206 Nm
Torque RPM 3400 RPM 1800 RPM
Engine Bore Size 84 mm 76.3 mm
Engine Stroke Size 90 mm 111 mm
Engine Compression Ratio 9.4:1 7.8:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1040 kg 1350 kg
Vehicle Length 3820 mm 5190 mm
Vehicle Width 1710 mm 1820 mm
Vehicle Height 1200 mm 1400 mm
Wheelbase Size 2360 mm 3070 mm
Fuel Tank Capacity 59 L 68 L