1979 Mercedes-Benz 230 vs. 2012 Hyundai i20
To start off, 2012 Hyundai i20 is newer by 33 year(s). Which means there will be less support and parts availability for 1979 Mercedes-Benz 230. In addition, the cost of maintenance, including insurance, on 1979 Mercedes-Benz 230 would be higher. At 2,298 cc (4 cylinders), 1979 Mercedes-Benz 230 is equipped with a bigger engine. In terms of performance, 1979 Mercedes-Benz 230 (134 HP) has 35 more horse power than 2012 Hyundai i20. (99 HP). In normal driving conditions, 1979 Mercedes-Benz 230 should accelerate faster than 2012 Hyundai i20. With that said, vehicle weight also plays an important factor in acceleration. 1979 Mercedes-Benz 230 weights approximately 205 kg more than 2012 Hyundai i20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1979 Mercedes-Benz 230 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1979 Mercedes-Benz 230. However, in wet, icy, snow, or gravel driving conditions, 2012 Hyundai i20, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1979 Mercedes-Benz 230 (205 Nm @ 3500 RPM) has 68 more torque (in Nm) than 2012 Hyundai i20. (137 Nm @ 4200 RPM). This means 1979 Mercedes-Benz 230 will have an easier job in driving up hills or pulling heavy equipment than 2012 Hyundai i20. 2012 Hyundai i20 has automatic transmission and 1979 Mercedes-Benz 230 has manual transmission. 1979 Mercedes-Benz 230 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Hyundai i20 will be easier to drive especially in heavy traffic.
Compare all specifications:
1979 Mercedes-Benz 230 | 2012 Hyundai i20 | |
Make | Mercedes-Benz | Hyundai |
Model | 230 | i20 |
Year Released | 1979 | 2012 |
Engine Position | Front | Front |
Engine Size | 2298 cc | 1396 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 134 HP | 99 HP |
Torque | 205 Nm | 137 Nm |
Torque RPM | 3500 RPM | 4200 RPM |
Engine Bore Size | 95.5 mm | 77 mm |
Engine Stroke Size | 80.3 mm | 75 mm |
Engine Compression Ratio | 9.0:1 | 17:01 |
Top Speed | 180 km/hour | 180 km/hour |
Acceleration 0-100mph | 11.5 seconds | 11.6 seconds |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1360 kg | 1155 kg |
Vehicle Length | 4730 mm | 3940 mm |
Vehicle Width | 1790 mm | 1710 mm |
Vehicle Height | 1440 mm | 1490 mm |
Wheelbase Size | 2800 mm | 2525 mm |
Fuel Consumption Highway | 10.3 L/100km | 4.8 L/100km |
Fuel Consumption City | 12.9 L/100km | 7.2 L/100km |
Fuel Consumption Overall | 8.9 L/100km | 5.4 L/100km |