1979 Seat 131 vs. 1961 Alfa Romeo 2000
To start off, 1979 Seat 131 is newer by 18 year(s). Which means there will be less support and parts availability for 1961 Alfa Romeo 2000. In addition, the cost of maintenance, including insurance, on 1961 Alfa Romeo 2000 would be higher. At 1,995 cc (4 cylinders), 1979 Seat 131 is equipped with a bigger engine. In terms of performance, 1979 Seat 131 (132 HP @ 6000 RPM) has 17 more horse power than 1961 Alfa Romeo 2000. (115 HP @ 5700 RPM). In normal driving conditions, 1979 Seat 131 should accelerate faster than 1961 Alfa Romeo 2000. With that said, vehicle weight also plays an important factor in acceleration. 1961 Alfa Romeo 2000 weights approximately 173 kg more than 1979 Seat 131.
Because 1961 Alfa Romeo 2000 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Alfa Romeo 2000. However, in wet, icy, snow, or gravel driving conditions, 1979 Seat 131, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1979 Seat 131 | 1961 Alfa Romeo 2000 | |
| Make | Seat | Alfa Romeo |
| Model | 131 | 2000 |
| Year Released | 1979 | 1961 |
| Engine Position | Front | Front |
| Engine Size | 1995 cc | 1975 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 132 HP | 115 HP |
| Engine RPM | 6000 RPM | 5700 RPM |
| Engine Compression Ratio | 9.5:1 | 8.5:1 |
| Top Speed | 180 km/hour | 174 km/hour |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1005 kg | 1178 kg |
| Vehicle Length | 4240 mm | 4500 mm |
| Vehicle Width | 1670 mm | 1660 mm |
| Vehicle Height | 1410 mm | 1330 mm |
| Wheelbase Size | 2500 mm | 2510 mm |
