1980 Alfa Romeo Giulietta vs. 1975 Lancia Beta

To start off, 1980 Alfa Romeo Giulietta is newer by 5 year(s). Which means there will be less support and parts availability for 1975 Lancia Beta. In addition, the cost of maintenance, including insurance, on 1975 Lancia Beta would be higher. At 1,995 cc (4 cylinders), 1975 Lancia Beta is equipped with a bigger engine. In terms of performance, 1980 Alfa Romeo Giulietta (129 HP @ 5400 RPM) has 14 more horse power than 1975 Lancia Beta. (115 HP @ 5500 RPM). In normal driving conditions, 1980 Alfa Romeo Giulietta should accelerate faster than 1975 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 1980 Alfa Romeo Giulietta weights approximately 20 kg more than 1975 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Alfa Romeo Giulietta is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Alfa Romeo Giulietta. However, in wet, icy, snow, or gravel driving conditions, 1975 Lancia Beta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Alfa Romeo Giulietta (181 Nm @ 4000 RPM) has 5 more torque (in Nm) than 1975 Lancia Beta. (176 Nm @ 2800 RPM). This means 1980 Alfa Romeo Giulietta will have an easier job in driving up hills or pulling heavy equipment than 1975 Lancia Beta.

Compare all specifications:

1980 Alfa Romeo Giulietta 1975 Lancia Beta
Make Alfa Romeo Lancia
Model Giulietta Beta
Year Released 1980 1975
Engine Position Front Front
Engine Size 1961 cc 1995 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 129 HP 115 HP
Engine RPM 5400 RPM 5500 RPM
Torque 181 Nm 176 Nm
Torque RPM 4000 RPM 2800 RPM
Engine Bore Size 84 mm 84 mm
Engine Stroke Size 88.5 mm 90 mm
Engine Compression Ratio 9.0:1 8.9:1
Top Speed 185 km/hour 180 km/hour
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1080 kg 1060 kg
Vehicle Length 4220 mm 4290 mm
Vehicle Width 1660 mm 1660 mm
Vehicle Height 1410 mm 1330 mm
Wheelbase Size 2520 mm 2550 mm
Fuel Tank Capacity 50 L 51 L