1980 Alpine A 310 vs. 1999 Buick Regal

To start off, 1999 Buick Regal is newer by 19 year(s). Which means there will be less support and parts availability for 1980 Alpine A 310. In addition, the cost of maintenance, including insurance, on 1980 Alpine A 310 would be higher. At 3,789 cc (6 cylinders), 1999 Buick Regal is equipped with a bigger engine. In terms of performance, 1999 Buick Regal (197 HP @ 5200 RPM) has 49 more horse power than 1980 Alpine A 310. (148 HP @ 6000 RPM) In normal driving conditions, 1999 Buick Regal should accelerate faster than 1980 Alpine A 310. With that said, vehicle weight also plays an important factor in acceleration. 1999 Buick Regal weights approximately 580 kg more than 1980 Alpine A 310. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Alpine A 310 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Alpine A 310. However, in wet, icy, snow, or gravel driving conditions, 1999 Buick Regal, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Buick Regal (311 Nm @ 4000 RPM) has 108 more torque (in Nm) than 1980 Alpine A 310. (203 Nm @ 3500 RPM). This means 1999 Buick Regal will have an easier job in driving up hills or pulling heavy equipment than 1980 Alpine A 310. 1999 Buick Regal has automatic transmission and 1980 Alpine A 310 has manual transmission. 1980 Alpine A 310 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Buick Regal will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 Alpine A 310 1999 Buick Regal
Make Alpine Buick
Model A 310 Regal
Year Released 1980 1999
Body Type Coupe Sedan
Engine Position Rear Front
Engine Size 2664 cc 3789 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type V V
Valves per Cylinder 2 valves 2 valves
Horse Power 148 HP 197 HP
Engine RPM 6000 RPM 5200 RPM
Torque 203 Nm 311 Nm
Torque RPM 3500 RPM 4000 RPM
Engine Bore Size 88.1 mm 97 mm
Engine Stroke Size 73 mm 86 mm
Engine Compression Ratio 10.1:1 9.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 980 kg 1560 kg
Vehicle Length 4190 mm 4990 mm
Vehicle Width 1650 mm 1850 mm
Vehicle Height 1160 mm 1440 mm
Wheelbase Size 2280 mm 2780 mm
Fuel Tank Capacity 38 L 64 L