1980 Alpine A 310 vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 30 year(s). Which means there will be less support and parts availability for 1980 Alpine A 310. In addition, the cost of maintenance, including insurance, on 1980 Alpine A 310 would be higher. At 2,664 cc (6 cylinders), 1980 Alpine A 310 is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (171 HP @ 6000 RPM) has 23 more horse power than 1980 Alpine A 310. (148 HP @ 6000 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1980 Alpine A 310. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 650 kg more than 1980 Alpine A 310. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Alpine A 310 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Alpine A 310. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Alpine A 310 (203 Nm @ 3500 RPM) has 37 more torque (in Nm) than 2010 Chrysler Sebring. (166 Nm @ 4400 RPM). This means 1980 Alpine A 310 will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2010 Chrysler Sebring has automatic transmission and 1980 Alpine A 310 has manual transmission. 1980 Alpine A 310 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1980 Alpine A 310 | 2010 Chrysler Sebring | |
| Make | Alpine | Chrysler |
| Model | A 310 | Sebring |
| Year Released | 1980 | 2010 |
| Body Type | Coupe | Sedan |
| Engine Position | Rear | Front |
| Engine Size | 2664 cc | 2399 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 148 HP | 171 HP |
| Engine RPM | 6000 RPM | 6000 RPM |
| Torque | 203 Nm | 166 Nm |
| Torque RPM | 3500 RPM | 4400 RPM |
| Engine Compression Ratio | 10.1:1 | 10.5:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 980 kg | 1630 kg |
| Vehicle Length | 4190 mm | 4850 mm |
| Vehicle Width | 1650 mm | 1810 mm |
| Vehicle Height | 1160 mm | 1550 mm |
| Wheelbase Size | 2280 mm | 2770 mm |
| Fuel Tank Capacity | 38 L | 64 L |
