1980 Austin Allegro vs. 1975 Jensen Interceptor
To start off, 1980 Austin Allegro is newer by 5 year(s). Which means there will be less support and parts availability for 1975 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1975 Jensen Interceptor would be higher. At 7,206 cc (8 cylinders), 1975 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1975 Jensen Interceptor (215 HP @ 5200 RPM) has 171 more horse power than 1980 Austin Allegro. (44 HP @ 5250 RPM) In normal driving conditions, 1975 Jensen Interceptor should accelerate faster than 1980 Austin Allegro. With that said, vehicle weight also plays an important factor in acceleration. 1975 Jensen Interceptor weights approximately 1154 kg more than 1980 Austin Allegro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1975 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 1980 Austin Allegro, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Jensen Interceptor (448 Nm @ 3200 RPM) has 374 more torque (in Nm) than 1980 Austin Allegro. (74 Nm @ 2900 RPM). This means 1975 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 1980 Austin Allegro. 1975 Jensen Interceptor has automatic transmission and 1980 Austin Allegro has manual transmission. 1980 Austin Allegro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Jensen Interceptor will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1980 Austin Allegro | 1975 Jensen Interceptor | |
| Make | Austin | Jensen |
| Model | Allegro | Interceptor |
| Year Released | 1980 | 1975 |
| Engine Position | Front | Front |
| Engine Size | 1098 cc | 7206 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 44 HP | 215 HP |
| Engine RPM | 5250 RPM | 5200 RPM |
| Torque | 74 Nm | 448 Nm |
| Torque RPM | 2900 RPM | 3200 RPM |
| Engine Bore Size | 64.6 mm | 109.8 mm |
| Engine Stroke Size | 83.7 mm | 95.3 mm |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 815 kg | 1969 kg |
| Vehicle Length | 3200 mm | 4780 mm |
| Vehicle Width | 1620 mm | 1760 mm |
| Vehicle Height | 1400 mm | 1350 mm |
| Wheelbase Size | 2450 mm | 2670 mm |
| Fuel Tank Capacity | 48 L | 98 L |
