1980 BMW 316 vs. 1980 Ford Falcon

To start off, both 1980 BMW 316 and 1980 Ford Falcon were released in the same year (1980). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 3,273 cc (6 cylinders), 1980 Ford Falcon is equipped with a bigger engine. In terms of performance, 1980 Ford Falcon (109 HP @ 4000 RPM) has 20 more horse power than 1980 BMW 316. (89 HP @ 5500 RPM) In normal driving conditions, 1980 Ford Falcon should accelerate faster than 1980 BMW 316. With that said, vehicle weight also plays an important factor in acceleration. 1980 Ford Falcon weights approximately 300 kg more than 1980 BMW 316. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Ford Falcon (228 Nm @ 2400 RPM) has 104 more torque (in Nm) than 1980 BMW 316. (124 Nm @ 3000 RPM). This means 1980 Ford Falcon will have an easier job in driving up hills or pulling heavy equipment than 1980 BMW 316.

Compare all specifications:

1980 BMW 316 1980 Ford Falcon
Make BMW Ford
Model 316 Falcon
Year Released 1980 1980
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 1573 cc 3273 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 89 HP 109 HP
Engine RPM 5500 RPM 4000 RPM
Torque 124 Nm 228 Nm
Torque RPM 3000 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 5 seats 5 seats
Vehicle Weight 1070 kg 1370 kg
Vehicle Length 4330 mm 4740 mm
Vehicle Width 1650 mm 1870 mm
Vehicle Height 1390 mm 1380 mm
Wheelbase Size 2580 mm 2830 mm